Quick guide for how to repair corrupt system files when Windows 10 freeze.
1. Press Windows button and R button at the same time.
2. Type in cmd and press Enter button.
3. Type in SFC /scannow and press Enter.
4. Wait for it to finish the repair.
Freezing up of Windows 10 can happen anytime. When this happens, the whole system can stop functioning or it may affect specific elements like the Taskbar. No doubt, many users experience the issue of ‘Windows 10 keeps freezing up randomly’ and this can be frustrating. In this article, we will look at seven different ways in which you can resolve the issue immediately.
This section looks at the seven ways you can quickly fix Windows 10 freezes randomly and restarting issue. Let’s check the solutions out!
Usually, when the system disk has low disk space, the performance of the system will be slowed and it can also cause random new Windows 10 install keeps freezing issue. To resolve this issue, do the following:
Ensure you have adequate free disk space on the C drive. If you don’t, clean up the junk files to free up disk space. You can use Windows 10 disk cleanup to complete the process. This will free up space and optimize the performance of your PC.
Faulty hardware is a major factor that can lead to freezing issues on a computer system. Therefore, you should check for any damaged hardware on your system. You may want to install another version of Windows to see if the issue persists. If it doesn’t and it only happens on Windows 10, then there is no issue with your hardware. Therefore, check the other ways to fix the issue.
USB drives and other external drives can also cause the issue of Windows 10 keeps freezing. Therefore, disconnect each external drive on your PC. You should also disconnect the keyboard and mouse at the same time and then reboot the system to check if the problem has been resolved. If it has, it means the external drives are causing the freezing issue.
Sometimes, when Windows 10 randomly freeze and hang, it is because the system files have been corrupted. To check and correct this issue and stop the freezing, you need to run a Command Prompt as the administrator. Check the black Command Prompt window and type in: SFC /scannow and click ‘Enter on your keyboard. This will scan and repair the corrupt files.
Newly installed programs on a PC can lead to the freezing of the computer. Therefore, if you have recently installed a new program on your computer and you are experiencing the freezing issue, the best thing is to uninstall the app to see if this will stop the problem.
The reason why Windows 10 freezing can be because of the incompatibility of drivers and hardware. If this is the issue, you need to update all the device drivers on your PC. To do this, follow the steps below:
1. Click the ‘Start’ menu and then the ‘Settings’ tab
2. Click on ‘Update and Security’ and select ‘Windows Update’ in the left plane
3. Click ‘Check for Updates’. Updates all the drives from this point. You should have a reliable internet connection when updating the device drivers
If you still notice that your Windows 10 computer keeps freezing randomly after trying all the above six methods to fix the issue, you may have to perform a system restore or a clean install of Windows 10 to resolve the issue. If you are resorting to this method, you need to backup your data and recover it when you are done. This is because performing a system restore or a clean install of Windows 10 will automatically erase all data on your PC. Therefore, you should back up your data to avoid major data loss.
To back up the data on your PC, we recommend iBeesoft Dbackup. This is the best software that you can trust to effectively and completely backup your data. This software is designed to maximize the backup process and the complete protection of your files, disks, partitions, and full operating system. It is a reliable, complete, and fast backup tool that enables you to fully backup all data on your PC, including system, hard drive/partition, files, and external drives. It also features automatic backup options, which make it easier and highly efficient.
In case you do not remember to backup your data before performing a system restore or clean install of Windows 10, you don’t have to panic. You can recover the lost data with a professional data recovery tool. For this, we also recommend iBeesoft Data Recovery software as the best software for the recovery process. iBeesoft Data Recovery tool is 100% safe, secure, and very effective for data recovery. It completely and efficiently recovers files from partition/hard disk, external hard drive, USB drive, and RAW drive, among others.
Step #1: Select the file types that you need to recover. When you launch the iBeesoft Data Recovery tool, all file types will be selected by default. You can unselect the files that you don’t want. When this is done, click the ‘Start’ button to begin the process.
Step #2: Select the location to find or scan the data. Depending on where the files you want to recover are saved, such as a specified location or partition, you should select the location. The software will scan the partition and search for the lost data. When it completes the process, the result window will pop up.
Step #3: Preview and recover deleted files in Windows 10. When the search window pops up, preview the files and restore all the files. If you need to conduct a further search, use the ‘Deep Scan’ menu to search for more data.
In this article, we have looked at how to fix Windows 10 keeps freezing issues. You should try the methods one after the other to fix the issue. If your final option is to perform a system restore, make sure you backup the data before you start with iBeesoft Dbackup. You can also use iBeesoft data recovery software to recover any lost data that may happen after the process.